• sales@alatuji.com

     

  • 021 8690 6777
    021 8690 6771
  • 0816 1740 8927
    0817 6700 726
  • Pin: 2856BC08
    New PIN : 5A357BF9
  • 0816 1740 8925
    0812 8006 9024
    0812 9595 7914
  • 0813 1066 1358
    0812 9595 7914

AU - 1012 B Smoothness, Porosity & Softness Tester

 


This instrument is used for testing the averageSmoothness, Porosity and Softness of paper and films by determining the time necessary for a certain volume of air to flow through the inserted sample, under a uniform pressure.

Electronic self starting timer for automatic measuring of air to pass through the test specimen. The timer starts automatically when the zero slit of the graduated ruler pass an optional read fork and stops automatically as soon as the predetermined volume of air has been passed through the sample. 

UEC-1012 C
HIGH PRESSURE POROSITY & SOFTNESS TESTER (GURLEY TYPE) For measuring the porosity & softness of highly dense paper.



Spesification

SPECIFICATIONS

Effective area of Porosity:

: 645.16 mm2.

Contact area of smoothness

: 645.16 mm2.

Contact Pressure of smoothness

: 0.21 Kg/cm2.

Softness contact area

: 645.16 mm2.

Steel Plug - Height approx.

: 5/100 mm.
   (100cc of air flows out in 10 sec.)

PRESSURE

- Soft Paper (e.g. news paper)

: 21.09 Kg/cm2

- Hard Paper

: 21.24 kg/cm2

The unit is supplied complete with - Lifting Handle Sample Punch, Adopter plate 2, 2 weights, 3 clamping plates. Air, at a low, uniform pressure is forced downward through an open tube to the upper orifice plate against which the sample is clamped. Each 50cc of air is marked and the test consists of timing the amount of air used in any of the three ways listed below:
SMOOTHNESS TEST
Lateral flow between several sheets.
POROSITY TEST
Rate of flow through one square inch.
SOFTNESS TEST
Rate of flow over the surface which has been constructed by a given weight.
Uniform clamping pressure is provided by a lever arm, to which weight can be attached.
The instrument conforms to the following standards:

APPLICABLE STANDARD
TAPPI T 479 , TAPPI T 460 , TAPPI T 490 , ASTM D 726 , SCAN P 53,
SCAN P 19, APPITA P 420, CPPA P 14

OPTION:

Electronic self starting timer as an optional accessory, for automatic measuring of either 25, 50, 100, 150, 200 or 300cm3 air to pass through the test specimen. The timer starts automatically when the zero slit of the graduated ruler pass an optional read fork and stops automatically as soon as the predetermined volume of air has been passed through the sample.

Shipping Data

Net Weight
Gross weight
Dimension

Ordering Data

Model No.
Voltage
Frequency

Changes:
UEC products undergo continuous development. The technical data in this catalogue are therefore subject to change.

Inquiry

Name :
Company :
Address :
Email :
Handphone :
Subject :
Product Name :
Product Type :
Message :
   

Video

Tidak ada video untuk produk ini

Testimoni

Download PDF

Tidak ada file catalog untuk produk ini


Artikel Terkait dengan Produk AU - 1012 B Smoothness, Porosity & Softness Tester


NEWSLETTER

 
 

TESTIMONIALS

B2TKS

B2TKS
Sangat jarang perusahaan seperti ini di Indonesia!  Mereka terus-menerus mengikuti perkembangan inovasi engineering test & measurement, “nyambung” berdiskusi teknis dan berpengalaman, memiliki visi pengembangan teknologi pengukuran, pengujian, inspeksi dan monitoring.(Dr.-Ing. Ir. May Isnan - NDT Specialist B2TKS-BPPT)

Chevron

Chevron
Tim kerja Alat Uji dapat diandalkan. Sangat bagus dalam implementasi di lapangan. Secara umum kami puas dengan services nya!(Andre - HSE Chevron)

BPPT

BPPT
Saya baru sekali ini bertemu perusahaan engineering yang eksis seperti ini di Indonesia.  Sangat terbantu dengan solusi yang diberikan, sangat memuaskan!(Muksin Saleh, ST., MT - Fuel Conversion and Pollution Control Specialist, B2TE - BPPT)

BALITBANG

BALITBANG
Sistem monitoring yang disuplai oleh Alat Uji adalah yang tertinggi ratingnya sampai dengan saat ini dibandingkan sistem lain yang pernah kami miliki, Dengan sistem monitoring dari Alat Uji, Pengujian kami jadi lebih terkontrol karena ada visualisasi di sistemnya. (Gatot Sukmara - Badan Penelitian dan Pengembangan, Departemen Pekerjaan Umum)