• sales@alatuji.com

     

  • 021 8690 6777
    021 8690 6771
  • 0816 1740 8927
    0817 6700 726
  • Pin: 2856BC08
    New PIN : 5A357BF9
  • 0816 1740 8925
    0812 8006 9024
    0812 9595 7914
  • 0813 1066 1358
    0812 9595 7914

AU - 1016 A Stiffness Tester (Taber Type)

 

The instruments is designed for evaluating stiffness and resilient qualities of paper, plastics, cardboard, light metallic sheets, foil and other flexible materialhaving comparatively strong bending resistance. The 38 mm wide specimen clamped between a vice on a balanced pendulum supported by antifriction bearing and lower end clamp on a rotating disc then Specimen is bent by 15 degree at a constant speed and when it becomes 50 mm in load length, bending moment required to bent specimen is measured in gcm unit and the stiffness of the material is determined rotation are clockwise and counter clockwise, so that stiffness can be measured in both the directions.

Measuring range:
0-5000 Stiffness Units. 

Extra Option:
Triple shear cutter for sample preparation.



Spesification

 

SPECIFICATIONS

Test Range

: 0-10,000 stiffness unit.

Test Material
Thickness

: 0.004 to 1/8 of an inch (if within load range of    instrument)

Pendulum

: Two Directional

Specimen Size

: 38 X 70 mm (15 X 2.75 inch)
   for bending distance of 5 cm.
   38 X 38 mm (15 X 15 inch)
   for bending distance of 1 cm.

Load

: n5000 unit at 15 degree (standard bending) 10000 unit    at 7.5 degree (standard bending)

Roll Diameter

: 10.5 mm and 11 mm factory calibrated
   accuracy of ±1% full scale in each range.

Drive

: by small gear motor rated for 220V AC, 2 rpm,
   50 Hz electrical components sealed in
   housing.

The Tester conforms to following
   international Standards:

: TAPPI 489 m-69
   ASTM D-747-61-T
   JIS P-8185

   

The instrument is provided with accessories, including a shear for cutting material test specimens, additional weight for extending the test range and 10 unit compensator weight for 0-10 stiffness unit.

 

Shipping Data

Ordering Data

 

Net Weight

Model No.

 

Gross weight

Voltage

 

Dimension

Frequency

Changes:
UEC products undergo continuous development. The technical data in this catalogue are therefore subject to change

Inquiry

Name :
Company :
Address :
Email :
Handphone :
Subject :
Product Name :
Product Type :
Message :
   

Video

Tidak ada video untuk produk ini

Testimoni

Download PDF

Tidak ada file catalog untuk produk ini


Artikel Terkait dengan Produk AU - 1016 A Stiffness Tester (Taber Type)


NEWSLETTER

 
 

TESTIMONIALS

B2TKS

B2TKS
Sangat jarang perusahaan seperti ini di Indonesia!  Mereka terus-menerus mengikuti perkembangan inovasi engineering test & measurement, “nyambung” berdiskusi teknis dan berpengalaman, memiliki visi pengembangan teknologi pengukuran, pengujian, inspeksi dan monitoring.(Dr.-Ing. Ir. May Isnan - NDT Specialist B2TKS-BPPT)

Chevron

Chevron
Tim kerja Alat Uji dapat diandalkan. Sangat bagus dalam implementasi di lapangan. Secara umum kami puas dengan services nya!(Andre - HSE Chevron)

BPPT

BPPT
Saya baru sekali ini bertemu perusahaan engineering yang eksis seperti ini di Indonesia.  Sangat terbantu dengan solusi yang diberikan, sangat memuaskan!(Muksin Saleh, ST., MT - Fuel Conversion and Pollution Control Specialist, B2TE - BPPT)

BALITBANG

BALITBANG
Sistem monitoring yang disuplai oleh Alat Uji adalah yang tertinggi ratingnya sampai dengan saat ini dibandingkan sistem lain yang pernah kami miliki, Dengan sistem monitoring dari Alat Uji, Pengujian kami jadi lebih terkontrol karena ada visualisasi di sistemnya. (Gatot Sukmara - Badan Penelitian dan Pengembangan, Departemen Pekerjaan Umum)