• sales@alatuji.com

     

  • 021 8690 6777
    021 8690 6771
  • 0816 1740 8927
    0817 6700 726
  • 0816 1740 8925
    0812 8006 9024
    0812 9595 7914
  • 0813 1066 1358
    0852 1117 4591
    0813 8742 8586

AU - 1026 B Electronic Laboratory Crush Tester

 

Electronic Lab Crush Tester with digital readout: 

This instrument is used for accurate testing ofpaper, paperboard, solid fiberboard & corrugated board for RCT, ECT, CCT and FCT test and its components as well as performing compression test on all small packages.

RCT sample holder and removable disc (08 numbers) for a thickness of 0.15 mm to 0.49 mm (supplied with main unit) Load range: 0-500 Kg. (5000 N.) 

Accessories are available for testing all the parameters. 

Test Strip Cutter for RCT 

Circular Cutter For Flat Crush Test 

Circular Neck Down Cutter 

Sample Cutter for Edge Crush Tester



Spesification

SPECIFICATIONS

1. Four figure ‘Peak Picking’ Digital Display for load.
2. Adjustable thresholds to obtain the optimum peak value of Crush Test
3. Simple and accurate readout on a digital display.
4. Electronic Force measurement by Loadcell.

Measuring Results:

: Breaking Force in Newtons.

Stroke Length:

: 76 mm.

Deformation Speed

: Calibrated 12.0 mm/min or variable speed selectable    upto 50 mm/min.

Return Speed

: maximum

Plate Size

: 125 X 125 mm.

Measuring Range

: ± 1% of measured value but not better than 0.5% of the    nominal value

Rupture Sensitivity

: 2 - 20 % of the relevant maximum load.

Thickness of test

: Min 0.15 with replacable 8 disc

specimen mm

: Max 0.49 mm

Sample Holder

: An aluminimum metal block containing annular groove    6.35 mm

deep

: and with an outer dia meter of 49.30mm supplied with    eight remov able disc for different thickness of test strips

Extra Options:

Precision Circular Punch & Die cutter:

: For preparation of test pieces towards Ring Crush    Test. Width 12.7 mm x 152 mm.

Circular Cutter

: For cuting out circular sample of board and similar    materail towards use in Flat Crush Test.

Circular Neck Down Cutter

: For preparing test peices for measurement of Edge    Crush Test

Sample cutter for edge crush test

: Pneumatic width 25 mm, 50 mm

Concora Medium FlutterModel UEC-3003

: For producing a sample to evaluate FCT/CMT    value

Applicable Standards

APPITA/AS 1301.449, FEFCO No. 50

Concor Medium Test

CPPA D.24, DIN 53143, ISO 7263, SCAN P27, TAPPI T809.

Ring Crush Test

CPPA D.33, DIN 53134, SCAN P34, TAPPI T818 and T822

Edge Crush Test

DIN 53149, FEFCO No. 8, ISO 3037, NF Q 03-041, SCAN P33, TAPPI T811 and T824

Flat Crush Test

CPPA D.20, FEFCO No. 6, ISO 3035, NF Q 03-033, SCAN P32, TAPPI 808.

PAT

FEFCO No. 11, TAPPI T821

Shipping Data Ordering Data

Net Weight

Model No.

Gross weight

Voltage Single Phase, 220 V, 50Hz

Dimension

Frequency.

Changes:
UEC products undergo continuous development. The technical data in this catalogue are therefore subject to change

Inquiry

Name :
Company :
Address :
Email :
Handphone :
Subject :
Product Name :
Product Type :
Message :
   

Video

Tidak ada video untuk produk ini

Testimoni

Download PDF

Tidak ada file catalog untuk produk ini


Artikel Terkait dengan Produk AU - 1026 B Electronic Laboratory Crush Tester


NEWSLETTER

 
 

TESTIMONIALS

B2TKS

B2TKS
Sangat jarang perusahaan seperti ini di Indonesia!  Mereka terus-menerus mengikuti perkembangan inovasi engineering test & measurement, “nyambung” berdiskusi teknis dan berpengalaman, memiliki visi pengembangan teknologi pengukuran, pengujian, inspeksi dan monitoring.(Dr.-Ing. Ir. May Isnan - NDT Specialist B2TKS-BPPT)

Chevron

Chevron
Tim kerja Alat Uji dapat diandalkan. Sangat bagus dalam implementasi di lapangan. Secara umum kami puas dengan services nya!(Andre - HSE Chevron)

BPPT

BPPT
Saya baru sekali ini bertemu perusahaan engineering yang eksis seperti ini di Indonesia.  Sangat terbantu dengan solusi yang diberikan, sangat memuaskan!(Muksin Saleh, ST., MT - Fuel Conversion and Pollution Control Specialist, B2TE - BPPT)

BALITBANG

BALITBANG
Sistem monitoring yang disuplai oleh Alat Uji adalah yang tertinggi ratingnya sampai dengan saat ini dibandingkan sistem lain yang pernah kami miliki, Dengan sistem monitoring dari Alat Uji, Pengujian kami jadi lebih terkontrol karena ada visualisasi di sistemnya. (Gatot Sukmara - Badan Penelitian dan Pengembangan, Departemen Pekerjaan Umum)