AU - 2002 A Beating & Freeness Tester REGULAR & MECHANICAL LIFTING MODEL
This instrument is used for determination of refining as freeness of wood fibre, ground wood Mechanical pulp and
fibers. It measures the drainage capacity of beaten pulp and checking the progress of beating process.
Model with provision of Mechanically controlled valve lifting and Plexiglasmeasuring cylinder for Schopper Riegler value with standard wire mesh.
A stock dilution of 2 gram/L is poured into the cylindric container. After 5 seconds the saling cone is lifted at an after the acceleration constant speed rate, and the stock is drained through a wire, passes through the side orifice, and is a measure of the draining capacity of the sample.
Spesification
SPECIFICATIONS
Sample |
: 2 g. Oven Dried |
Consistency: |
: 0.2% |
Reproducibility: |
: approximately 1 0SR |
Plexiglass measuring cylinder 100 Sec. with double graduation on CCM and 0SR. Calibrated Nozzle and screen plate container grip enabling easy removal for cleaning. Standard wiremesh fixing and removing attachment Semi-Automatic sealing cone lifting arrangement. Nozzle calibrated according to 0SR standard. Complies with SCAN standard M-3.65 Correlation of results with the original Schopper instruments |
Shipping Data |
Ordering Data |
|
Net Weight |
Model No. |
|
Gross weight |
Voltage |
|
Dimension |
Frequency |
Changes:
UEC products undergo continuous development. The technical data in this catalogue is therefore subject to change
Inquiry
Video
Tidak ada video untuk produk ini