• sales@alatuji.com

     

  • 021 8690 6777
    021 8690 6770
  • 0812 9595 7914 (Mr. Parmin)
    0813 1066 1358 (Ms. Eki)
    0812 8333 5497 (Mr. Muslim)
  • 0812 1248 2471 (Mr. Alfin)
    0819 4401 4959 (Mr. Arya)

Low Temperature Retraction Tester (TR Tester) UD-4000

 

The standard model UD-4000 consists of one main testing unit and one subunit of touch-screen monitor.


Feature

  • The standard model UD-4000 consists of one main testing unit and one subunit of touch-screen monitor.

  • Manufacturing Standards: ASTM D 1329, ISO 2921, JIS K 6261

  • Temperature: -70? ~ 0? (depending on heat transfer liquid used)

  • Temperature resolution: 0.1?.

  • Temperature check: By means of heat regulator with PID microprocessor with 0.1? accuracy.

  • Cooling system: Liquid nitrogen with internal heat exchanges.

  • Test Chamber: Test chamber capacity of 5 liters.

  • Chamber material: Stainless steel.

  • Sample holder: 6 samples

  • Instrument dimensions: 500 * 500 * 1900 mm (W * D * H)

  • Weight: 210kg.

  • Electric Supply: AC 220V±10%, 50Hz ± 3Hz, 4A, Single Phase.
    or discretionary at user needs.


Spesification

  • Data produced by the instrument:
    a. TR test: TR10. TR30. TR50. TR70. TRx1, TRx2 (x1, x2 customer defined)
    b. Time from test start at calculated TR points

  • Graphic representation:
    a. Retraction percentage versus Temperature Curves for the 6 samples tested.
    b. Temperature versus Time curve during test.

  • Automatic performance of the test with adjustment of the thermal cycle and automatic release of the samples on termination of the conditioning time depending on the test procedures used.

  • Graphic representation of Retraction curves for each of the 6 samples and of Test Bath temperature during test.

  • Possibility of testing groups of different samples with different percentage elongation during the same test.

  • Calculation of the significant test results for each sample.

  • Calculation of average and standard deviation for each group of samples tested.

  • Setting of tolerance limits for conditioning temperature to verify correct pre-start conditioning

Inquiry

Name :
Company :
Address :
Email :
Handphone :
Subject :
Product Name :
Product Type :
Message :
   

Video

Tidak ada video untuk produk ini

Testimoni

Download PDF


Artikel Terkait dengan Produk Low Temperature Retraction Tester (TR Tester) UD-4000


NEWSLETTER

 

TESTIMONIALS

B2TKS

B2TKS
Sangat jarang perusahaan seperti ini di Indonesia!  Mereka terus-menerus mengikuti perkembangan inovasi engineering test & measurement, “nyambung” berdiskusi teknis dan berpengalaman, memiliki visi pengembangan teknologi pengukuran, pengujian, inspeksi dan monitoring.(Dr.-Ing. Ir. May Isnan - NDT Specialist B2TKS-BPPT)

Chevron

Chevron
Tim kerja Alat Uji dapat diandalkan. Sangat bagus dalam implementasi di lapangan. Secara umum kami puas dengan services nya!(Andre - HSE Chevron)

BPPT

BPPT
Saya baru sekali ini bertemu perusahaan engineering yang eksis seperti ini di Indonesia.  Sangat terbantu dengan solusi yang diberikan, sangat memuaskan!(Muksin Saleh, ST., MT - Fuel Conversion and Pollution Control Specialist, B2TE - BPPT)

BALITBANG

BALITBANG
Sistem monitoring yang disuplai oleh Alat Uji adalah yang tertinggi ratingnya sampai dengan saat ini dibandingkan sistem lain yang pernah kami miliki, Dengan sistem monitoring dari Alat Uji, Pengujian kami jadi lebih terkontrol karena ada visualisasi di sistemnya. (Gatot Sukmara - Badan Penelitian dan Pengembangan, Departemen Pekerjaan Umum)

 
Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji