Rubber Process Analyzer [RPA] UR-2020
- The standard UR-2020 consists of one main testing unit and one subunit of control and data analysis equipped with one 1GB compatible computer?19” colour monitor, 80GB HDD, one HP-D2560 colour jet printer, and one 16X DVD-ROM.
- Operation System?Microsoft Windows XP.
- Manufacturing Standards?in compliance with ASTM D5289 ,D6204, D6601
- Temperature?From room temperature to 250?, PID control. Decreasing temperature by air cooled; The heating and cooling speed can reach1?/sec.
- Temperature accuracy?within±0.3?
- Temperature display resolution?0.1?
- Oscillating frequency : 0.03Hz to 33Hz(2 – 2000mpc), at 0.02Hz increment.
- Torque Range?preset at 25,50,100,200 in-lb; or discretionary at user’s pleasure
- Torque unit?in-lb., cm-kg., or dN-m.
- Oscillating angle :±0.05°to 90°of arc(±0.07% ~±1256%), at 0.14% increment.
- Frequency/Angle limit: Limited by frequency(cpm)*angle (°of arc)=2047
- Motor: Direct Drive Servo Motor, angle resolution: 650,000pulse/rev
- Temperature controller: Micro temperature controller, reactive time 50ms.
- Torque sensor: Resolution can reach 0.2%
- Electricity Supply?AC120V±10%,50/60Hz±3Hz,15A,Single Phase.
Others are selectable by order.
- Air pressure Supply?4.5kg/cm2 or 65 Psi (Air-compressor is to be user’s own equipment.).
- Size of Specimen: about 5cm3.
- Partially supposed variable test parameters have been built up in advance, can directly loading or revising condition to carry out the test.
- Can adopt the optional UCAD software to choose the excellent formula-matching and experimental recommendations.
- Using the precise electronic circuit to isolate various kinds of noises; getting good performance in reproducibility and repeatability by our exclusive DSP analysis program.
- Automatically torque value and loss angle calibrating.
Tidak ada video untuk produk ini