• sales@alatuji.com

     

  • 021 8690 6777
    021 8690 6770
  • 0812 9595 7914 (Mr. Parmin)
    0813 1066 1358 (Ms. Eki)
    0812 8333 5497 (Mr. Muslim)
  • 0812 1248 2471 (Mr. Alfin)
    0819 4401 4959 (Mr. Arya)

TIME3210 Surface Roughness Tester

 

TIME3210 surface roughness tester is a handheld instrument with the advantage of being small size, practical, stable performance. Easy operating is its unique characteristic. Being able to test on the four vertical direction is its another characteristic.


Feature

  • Pocket-size unit with economical price, widely used in
    production lines, workshops and labs
  • Wide measuring range suitable for most materials, and
    applicable for both inside and outside cylinder
  • Ragged design device with a long lifetime, while keeping
    the accurate and reliable data results
  • Measurement and conversion among Ra, Rt and Rz
  • All calculated measurement results shown on its LCD
    back-lit display hardly after tested
  • Measuring Direction: any direction 360°
  • Indicator and alarm for low battery, out-of-limit values and
    dysfunction
  • Chargeable Li battery and improvement of the circuits
    function
  • Improvement and protection for sensor to secure the high
    accuracy and good stability.
  • Data transfer function and calibration function.

Spesification

Measuring Range R a: 0.03μm?6.35μm
R t: 0.2μm?25.3μm
R z: 0.2μm?25.3μm
Error ≤±10%
Repetability ≤6%
Display resolution 0.01μm
Cutoff Length (L) 0.8mm (Filter: RC Filter)
Evaluation length 1L,3L,5L?selectable?
Driver speed 3mm/s
Display LCD, 3 digital
Interface RS232
Power 9V alkaline battery
Pickup Pickup testing at 90°, 180°and 270°
Inductive
The max.testing force of pickup <16mN
Operating temperature 0??40?
Storage temperature -20??65?

Inquiry

Name :
Company :
Address :
Email :
Handphone :
Subject :
Product Name :
Product Type :
Message :
   

Video

Tidak ada video untuk produk ini

Testimoni


Artikel Terkait dengan Produk TIME3210 Surface Roughness Tester


NEWSLETTER

 

TESTIMONIALS

B2TKS

B2TKS
Sangat jarang perusahaan seperti ini di Indonesia!  Mereka terus-menerus mengikuti perkembangan inovasi engineering test & measurement, “nyambung” berdiskusi teknis dan berpengalaman, memiliki visi pengembangan teknologi pengukuran, pengujian, inspeksi dan monitoring.(Dr.-Ing. Ir. May Isnan - NDT Specialist B2TKS-BPPT)

Chevron

Chevron
Tim kerja Alat Uji dapat diandalkan. Sangat bagus dalam implementasi di lapangan. Secara umum kami puas dengan services nya!(Andre - HSE Chevron)

BPPT

BPPT
Saya baru sekali ini bertemu perusahaan engineering yang eksis seperti ini di Indonesia.  Sangat terbantu dengan solusi yang diberikan, sangat memuaskan!(Muksin Saleh, ST., MT - Fuel Conversion and Pollution Control Specialist, B2TE - BPPT)

BALITBANG

BALITBANG
Sistem monitoring yang disuplai oleh Alat Uji adalah yang tertinggi ratingnya sampai dengan saat ini dibandingkan sistem lain yang pernah kami miliki, Dengan sistem monitoring dari Alat Uji, Pengujian kami jadi lebih terkontrol karena ada visualisasi di sistemnya. (Gatot Sukmara - Badan Penelitian dan Pengembangan, Departemen Pekerjaan Umum)

 
Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji