UV lamp accelerated environment tester

Spesification

The above parameter belongs to the standard machine section, Welcome to customize

1. The number of sample holder clamps: 20
2. The sample rack clamps Dimensions: 404 & times; 105 (mm)
3. Using the back of the scroll type drainage system and drainage U-shaped plot sinks
4. The surface of the sample and the UV lamp distance of 50 mm and a plane parallel to
5. The actual studio by the test sample holder and constitutes inside walls, trapezoidal
6. Tank water level automatic replenishment;
7. The bottom chamber can be fixed with high quality PU wheels;

1, The inner bladder of the chamber is made of imported high-class stainless steel plate while the outer bladder is made of SUS 304 steel plate.

2, The heating mode adopts inner bladder trough type heating with its rapid temperature rise and even temperature distribution.

1. The use of the blackboard temperature meter control heating, the temperature is more stable.
2. Radiometer probe (optional) using fixed without each loading and unloading.
3. The amount of radiation using high-precision measurement and display of special ultraviolet radiation meter.
4. Light and condensation can be independently controlled alternating cycle control.
5. The time independent control of light and condensation control and alternating cycle time can be set in one thousand hours.
6. Automatic lighting state detection UV light, and visualize what the first few rows
7. Enables manual adjustment and automatic adjustment irradiance irradiance

The standard test specimen holder accommodates 2 panels 75×150mm. The test panels are actual the side wall of the chamber. To properly seal the chamber, it is important to have every panel holder filled with specimens or blank panels and to have panel holders in place.

ISO 4892-3,ASTM G154

ASTM D4587: Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings

ASTM D4799: Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method)

 ASTM D4329: Standard Practice for Fluorescent UV Exposure of Plastics

AATCC TM186: Weather Resistance: UV Light and Moisture Exposure

ASTM D5208: Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics

IEC 61345: UV Test for Photovaltalic (PV) Modules