• sales@alatuji.com

     

  • 021 8690 6777
    021 8690 6770
  • 0812 9595 7914 (Mr. Parmin)
    0813 1066 1358 (Ms. Eki)
    0812 8333 5497 (Mr. Muslim)
  • 0812 1248 2471 (Mr. Alfin)
    0819 4401 4959 (Mr. Arya)

CZY-GC Primary Adhesive Tester (PSTC-6)

 

Test Principle

In the determination of tack by rolling-ball method, a steel ball is released at the top of an inclined trough, the allowed to accelerate down and roll on to a horizontal surface covered with a pressure-sensitive adhesive. Tack is determined by measuring the distance that the steel ball travels across the adhesive before stopping.

 

Test Standards

GB/T 4825 (Method B: Inclined Trough Rolling Ball Method), PSTC-6, ASTM D3121


Feature

 

  • The instrument is designed according to the inclined trough rolling ball method and can be used for tack determination of specimens
  • The structure and steel balls of the instrument are designed according to national standards, which guarantees the accuracy of test data

 


Spesification

CZY-GC Primary Adhesive Tester (PSTC-6) is applicable to tack test of pressure-sensitive tapes and other similar pressure-sensitive adhesives.

Technical Specifications

SpecificationsCZY-GC
Test Angle 21.5°
Standard Steel Ball ?11.112 mm (7/16″)
Instrument Dimension 240 mm (L)×58 mm (W)×65 mm (H)
Net Weight 0.5 kg

Note 1: The parameters in the table are measured by professional operator in Labthink laboratory according to relative requirements for laboratory standard conditions.

Note 2: The described product features, test standards and applications should be in line with Technical Specifications.

 

Basic Applications Applicable to tack test of pressure-sensitive tapes and similar pressure-sensitive adhesives with inclined trough rolling ball method

Inquiry

Name :
Company :
Address :
Email :
Handphone :
Subject :
Product Name :
Product Type :
Message :
   

Video

Tidak ada video untuk produk ini

Testimoni

Download PDF

Tidak ada file catalog untuk produk ini


Artikel Terkait dengan Produk CZY-GC Primary Adhesive Tester (PSTC-6)


NEWSLETTER

 

TESTIMONIALS

B2TKS

B2TKS
Sangat jarang perusahaan seperti ini di Indonesia!  Mereka terus-menerus mengikuti perkembangan inovasi engineering test & measurement, “nyambung” berdiskusi teknis dan berpengalaman, memiliki visi pengembangan teknologi pengukuran, pengujian, inspeksi dan monitoring.(Dr.-Ing. Ir. May Isnan - NDT Specialist B2TKS-BPPT)

Chevron

Chevron
Tim kerja Alat Uji dapat diandalkan. Sangat bagus dalam implementasi di lapangan. Secara umum kami puas dengan services nya!(Andre - HSE Chevron)

BPPT

BPPT
Saya baru sekali ini bertemu perusahaan engineering yang eksis seperti ini di Indonesia.  Sangat terbantu dengan solusi yang diberikan, sangat memuaskan!(Muksin Saleh, ST., MT - Fuel Conversion and Pollution Control Specialist, B2TE - BPPT)

BALITBANG

BALITBANG
Sistem monitoring yang disuplai oleh Alat Uji adalah yang tertinggi ratingnya sampai dengan saat ini dibandingkan sistem lain yang pernah kami miliki, Dengan sistem monitoring dari Alat Uji, Pengujian kami jadi lebih terkontrol karena ada visualisasi di sistemnya. (Gatot Sukmara - Badan Penelitian dan Pengembangan, Departemen Pekerjaan Umum)

 
Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji