• sales@alatuji.com

     

  • 021 8690 6777
    021 8690 6770
  • 0812 9595 7914 (Mr. Parmin)
    0813 1066 1358 (Ms. Eki)
    0812 8333 5497 (Mr. Muslim)
  • 0812 1248 2471 (Mr. Alfin)
    0819 4401 4959 (Mr. Arya)

TT210

 

Alat ukur ketebalan lapisan seperti cat, epoxy, kertas, plastik dan lain-lain yang basenya magnetik atau non magnetik


Feature

  • Two measuring methods: magnetic induction (F) and eddy current (N)
  • Magnetic induction (F) method is used to measure the thickness of non-magnetic coating on ferrous metal
  • Eddy current (N) method is used to measure the thickness of non-conducting coating on non-ferrous materials
  • Automatic recognition of substrate
  • Automatic selection of measuring methods
  • 5 statistical ways: Mean values / Max. values / Min. values / testing numbers.(No.) / standard deviations (S.DeV)
  • Upper-lower limit setting and sound alarm
  • Data output to printer or PC by RS232 cable
  • 500 readings can be stored
  • 2 measuring modes: continuous / single
  • 2 stop ways: Manual/automatic

Spesification

Probe types

F

N

Measuring methods:

magnetic induction

eddy current

Measuring range:

0 to 1250 μm

0 to 1250 μm
0 to 40μm (for chromeplate on copper)

Minimum resolution:

0.1μm

Tolerance :

One point calibration

±(3%H+1)

± (3%H+1.5)

H means the thickness of tested piece

Two points calibration

±[(1~3)%H+1]

±[(1~3)%H+1.5]

H means the thickness of tested piece

Measuring condition

Min. curvature radius (mm)

Convexity 1.5

Convexity 3

Min. testing area diameter (mm)

Φ7

Φ5

Critical thickness of substrate

0.5

0.3

Power supply

Battery AAA 1.5V  (2pcs)

Working Temperature

0-40°C

Dimensions

110mm×50mm×23mm

Weight

100g

Inquiry

Name :
Company :
Address :
Email :
Handphone :
Subject :
Product Name :
Product Type :
Message :
   

Video

Tidak ada video untuk produk ini

Testimoni


Artikel Terkait dengan Produk TT210


NEWSLETTER

 

TESTIMONIALS

B2TKS

B2TKS
Sangat jarang perusahaan seperti ini di Indonesia!  Mereka terus-menerus mengikuti perkembangan inovasi engineering test & measurement, “nyambung” berdiskusi teknis dan berpengalaman, memiliki visi pengembangan teknologi pengukuran, pengujian, inspeksi dan monitoring.(Dr.-Ing. Ir. May Isnan - NDT Specialist B2TKS-BPPT)

Chevron

Chevron
Tim kerja Alat Uji dapat diandalkan. Sangat bagus dalam implementasi di lapangan. Secara umum kami puas dengan services nya!(Andre - HSE Chevron)

BPPT

BPPT
Saya baru sekali ini bertemu perusahaan engineering yang eksis seperti ini di Indonesia.  Sangat terbantu dengan solusi yang diberikan, sangat memuaskan!(Muksin Saleh, ST., MT - Fuel Conversion and Pollution Control Specialist, B2TE - BPPT)

BALITBANG

BALITBANG
Sistem monitoring yang disuplai oleh Alat Uji adalah yang tertinggi ratingnya sampai dengan saat ini dibandingkan sistem lain yang pernah kami miliki, Dengan sistem monitoring dari Alat Uji, Pengujian kami jadi lebih terkontrol karena ada visualisasi di sistemnya. (Gatot Sukmara - Badan Penelitian dan Pengembangan, Departemen Pekerjaan Umum)

 
Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji